• JAM msg base

    From Karel Kral@2:423/39 to All on Mon Mar 8 07:44:43 2021
    Hello All!

    I am experiencing some challenge there, most probably is not the issue of Golded, but - who knows.

    Tested Golded 1.1.4 and 1.1.5

    Tosser I have CrashMail II.

    If I use version 0.62, I have no issue with JAM. Higher than 0.62 means that I can see message headers, but no content. Version 1.7 cause that I can not access JAM at all from Golded. I would guess that there is something like "version/level of JAM"(?) which I am not sure how Golded is doing. In Crashmail changelog I see (beside others):

    ===========
    1.5 - Merge conversion from ulong/ushort to stdint types in src/jamlib/

    0.74 - Add usage of CPPFLAGS, CFLAGS, & LDFLAGS to the source file jamlib/Makefile.linux

    0.71 - Updated JAMLIB to 1.3.2

    0.7 - Upgraded JAMLIB to version 1.3.1
    ===========

    Looks to me that Golded can handle without issue some version lower than 1.3.1(?)

    If I avoid JAM usage, then I can combine Crashmail II (the latest version) with Golded without any other issue.

    Any idea?

    Thank you in advance

    Karel

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: Plast DATA (2:423/39)
  • From Paul Quinn@3:640/1384.125 to Karel Kral on Mon Mar 8 17:17:09 2021
    Hi! Karel,

    On 03/08/2021 04:44 PM, you wrote to All:

    I am experiencing some challenge there, most probably is not the issue
    of Golded, but - who knows.

    Tosser I have CrashMail II.

    I have at last two CM II systems: 1. a VirtualBox VM that has been running for about 10 years; and, 2. this point system that is about three years old (was a VM before that).

    0.71 - Updated JAMLIB to 1.3.2

    This is my preferred (JAM) with the CM II 0.71 version.

    Any idea?

    You might try a slightly older GoldEd version? E.g. I use a 1.1.4.7 version somewhere. It might be on this point... checking... yeah, it is! :)

    Cheers,
    Paul.

    --- Mozilla/5.0 (X11; Linux i686; rv:31.0) Gecko/20100101 Thunderbird/31.4.0
    * Origin: https://www.youtube.com/watch?v=PNFjLzVKVdk (3:640/1384.125)
  • From Kai Richter@2:240/77 to Karel Kral on Tue Mar 9 08:11:16 2021
    Hello Karel!

    08 Mar 21, Karel Kral wrote to All:

    Any idea?

    What about new created jam areas? Same problem?
    Difference between new CM2 jam and new golded jam areas?

    I don't now CM2. If possible you could try to get an actual version with that changelog reverted.

    Regards

    Kai

    --- GoldED+/LNX 1.1.4.7
    * Origin: Monobox (2:240/77)
  • From Karel Kral@2:423/39 to Paul Quinn on Tue Mar 9 12:55:35 2021
    Hello Paul!

    08 Mar 21 17:17, you wrote to me:

    You might try a slightly older GoldEd version? E.g. I use a 1.1.4.7 version somewhere. It might be on this point... checking... yeah, it
    is! :)

    So you mean that is really maybe Golded then?

    With the latest version CMII I was getting error in Golded.log like:

    ! 09:30:00 JamArea::load_message: can't read Jam subfield
    : 09:30:00 Info: Your msgbase is corrupted.
    + 09:30:00 Advice: Run a msgbase index rebuild/recover utility.

    With the 0.71 and above version of CMII I got no error, just saw headers, but not contect of message.

    Hm. I rather keep CMII 062 then to downgrade Golded...

    Karel

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: Plast DATA (2:423/39)
  • From Karel Kral@2:423/39 to Kai Richter on Tue Mar 9 12:59:59 2021
    Hello Kai!

    09 Mar 21 08:11, you wrote to me:

    What about new created jam areas? Same problem?
    Difference between new CM2 jam and new golded jam areas?

    Same problem. I had no time to check content / byte-wise that time.

    I don't now CM2. If possible you could try to get an actual version
    with that changelog reverted.

    Karel

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: Plast DATA (2:423/39)
  • From Oli@2:280/464.47 to Karel Kral on Tue Mar 9 13:57:44 2021
    Karel wrote (2021-03-08):

    Hello All!

    I am experiencing some challenge there, most probably is not the issue of Golded, but - who knows.

    Tested Golded 1.1.4 and 1.1.5

    Tosser I have CrashMail II.

    If I use version 0.62, I have no issue with JAM. Higher than 0.62 means that I can see message headers, but no content. Version 1.7 cause that I can not access JAM at all from Golded. I would guess that there is something like "version/level of JAM"(?) which I am not sure how Golded
    is doing. In Crashmail changelog I see (beside others):

    I don't have any problem with Crashmail 1.7 on Linux (32-bit ARM). Works perfectly fine with GoldEd and JamNNTPd.

    ---
    * Origin: . (2:280/464.47)
  • From Paul Quinn@3:640/1384 to Karel Kral on Tue Mar 9 23:00:22 2021
    Hi! Karel,

    On 09 Mar 2021, Karel Kral said the following...

    With the latest version CMII I was getting error in Golded.log like:

    I always got too many errors with later CM II versions. At least with 0.71 I had no trouble, even using my own compiled binaries.

    Hm. I rather keep CMII 062 then to downgrade Golded...

    Yes. Do whatever makes you happiest.

    It's a real 'zoo' of choices "out there". :)

    Cheers,
    Paul.

    --- Mystic BBS v1.12 A46 2020/08/26 (Linux/32)
    * Origin: Quinn's Rock - stuck in a Linux VM, again! (3:640/1384)
  • From Karel Kral@2:423/39 to Oli on Tue Mar 9 17:52:41 2021
    Hello Oli!

    09 Mar 21 13:57, you wrote to me:

    I don't have any problem with Crashmail 1.7 on Linux (32-bit ARM).
    Works perfectly fine with GoldEd and JamNNTPd.

    OK, there is 64bit. In changelog there is something related to 64bit and JAM, but in 1.7 is fixed already.

    Karel

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: Plast DATA (2:423/39)
  • From Kai Richter@2:240/77 to Karel Kral on Tue Mar 9 22:55:16 2021
    Hello Karel!

    09 Mar 21, Karel Kral wrote to Kai Richter:

    What about new created jam areas? Same problem?
    Difference between new CM2 jam and new golded jam areas?

    Same problem. I had no time to check content / byte-wise that time.

    Lost in translation, sorry. Golded can create an area - and a tosser can create an area. My idea was to test both ways for new areas. If one of that works you have a skelton jambase for other areas.

    The faster workaround would be to transfer the areas to squish.

    Regards

    Kai

    --- GoldED+/LNX 1.1.4.7
    * Origin: Monobox (2:240/77)
  • From Karel Kral@2:423/39 to Kai Richter on Wed Mar 10 13:20:55 2021
    Hello Kai!

    09 Mar 21 22:55, you wrote to me:

    Lost in translation, sorry. Golded can create an area - and a tosser
    can create an area. My idea was to test both ways for new areas. If
    one of that works you have a skelton jambase for other areas.

    The faster workaround would be to transfer the areas to squish.

    Using FTS1 format there ;-)

    Karel

    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: Plast DATA (2:423/39)
  • From Serg Podtynnyi@2:5030/3165 to Karel Kral on Sun Mar 14 13:17:26 2021
    Hello Karel!

    Tuesday March 09 2021 17:52, you wrote to Oli:

    I don't have any problem with Crashmail 1.7 on Linux (32-bit
    ARM). Works perfectly fine with GoldEd and JamNNTPd.

    OK, there is 64bit. In changelog there is something related to 64bit
    and JAM, but in 1.7 is fixed already.

    Could you send me your sample JAM database and some info about your system, I am experimenting with GoldED code and interesting to fix some bugs.


    Serg

    --- GoldED+ NG/W64-MSVC
    * Origin: ----> Default GoldED Origin <---- (2:5030/3165)