• Packet splitter

    From Frank Vest@1:124/6308.1 to Steve Quarrella on Wed Jan 17 09:08:29 2001
    On (17 Jan 01) Steve Quarrella wrote to Frank Vest...

    Hello Steve,


    size of the bundle and the destination (disk) they went to. Maybe
    if you did a quick and temporary reconfigure of Fastecho and just had it rebundle the packets to a floppy with a size to match.

    How would you reconfig FE to do that? Or do you mean in conjunction
    with that utility you mentioned? ISTR there was some kind of PKTSIZE utility some years ago that would do what I was seeking to do.

    I think there is a place to limit the size of the packets or bundles or something like that. Heck, I don't know. It was just another thought. :)

    I used to run a program called "packet Sorter" that would do what
    you want, but I had to quit because of Y2K problems.

    If it helps, I use a program called PSRT, by Jason Fesler, to sort
    packets and combine them into one. I can send that over if that does
    what you were needing previously. I just did a very quick look at TFM
    and didn't see its breaking things down into smaller chunks, though. <shrug>

    PSRT sounds like what I had. Maybe you have a newer version or something.

    On another thought for your bundles... Use the Internet. Upload the durn
    thing to your web site and then DL it with the Point system. :-) Dumb
    idea, over? :-))

    Frank

    flv@texoma.net
    http://texoma.net/~flv
    http://bise.tzo.com/r19

    ... Damn it Jim, I'm a doctor, not a SysOp.

    --- PPoint 3.01
    * Origin: Holy Cow! I'm A Point!! (1:124/6308.1)
  • From mark lewis@1:3634/12 to Steve Quarrella on Wed Jan 17 15:03:12 2001
    i'm assuming that you're saying you have a *.MO1
    that's 4MEG in size that is full of PKTs, right???

    Right!

    ok!

    I'd like to break it up into disk-sized chunks.
    disk-sized?? floppy disk??

    Oh, a sad day it is when we no longer think of "disk" as
    "floppy." <g>

    <<GG>> had to make sure... hate to ass-u-me things 8-0

    well, shouldn't matter, really as you can extract the PKTs and
    store/toss them straight without them having to be
    inside the bundle (*.MO1) file...

    That's running parallel to what I'm thinking in case I have to
    break the thing up manually. On the plus side, while it's not
    a program, a ZIP drive popped up last night while I was
    digging out of the computer room, and that'll easily address
    this problem. :-)

    other than wanting to break the _bundle_ into smaller pieces, i still don't know what the overall problem is that you're attempting to address...

    well, if you run 4DOS or such,

    I don't.

    uggg... how do you run your system, then?? hahahaha... if it wasn't for 4dos/4os2, my stuff would just stare at me and everyone else with its single unblinking eye... some of what i used to do with .bat file majik is built in or
    at least infinitely easier with 4dos/4os2... this is also probably one of the major reasons why i haven't moved this setup to winwhatever... i don't even want to think about what i'd have to do to get it running on linux... might not
    be as bad as it could be if dosemu is what i think it is OB-)

    you could do something like my logfile archiving stuff
    that i beat on for a while... my system archives *.log
    every night into one syslogs.zip file after renaming
    *.log to the

    I use AMU to do this. I KNOW it'll work with the software
    you use, and it's free!

    true but at that time, i don't think it was... might have been but it was way too capable/involved for my needs... just archiving my logs (only two lines in a .BAT file for the rename and the pkzip command) into one huge archive is enough for me... that is, until i decide that i want to keep them and get them off onto floppies <<GG>> but, i've already gone too far 'this year' because i didn't move the huge archive and files inside it from last year have already been replaced with this years files... i just hope that i don't need any of my old netmail that's been purged from the netmail area to text log with my NMPurge program... s'ok, though... an archive covering a year should be ok for the most part...

    hopeing i've not misunderstood something...

    You did good, and thanks for the note!

    not a problem... hope you got yours taken care of...

    )\/(ark


    * Origin: (1:3634/12)
  • From Steve Quarrella@1:393/9005 to Frank Vest on Wed Jan 17 14:54:00 2001
    I think there is a place to limit the size of the packets or
    bundles or something like that.

    Yep. You can do that in FESETUP. I see, though, that I neglected to set a limitation for this particular point, given that mail was going out for him every couple of hours with Irex. :-)

    If it helps, I use a program called PSRT, by Jason Fesler, to sort
    PSRT sounds like what I had. Maybe you have a newer version or
    something.

    Mine's dated 4/7/94, and still sorts.

    On another thought for your bundles... Use the Internet. Upload the
    durn thing to your web site and then DL it with the Point system. :-)
    Dumb idea, over? :-))

    Certainly something I considered. :-)

    ---
    * Origin: Where'd you get the gun, John? (1:393/9005)
  • From Steve Quarrella@1:393/9005 to mark lewis on Wed Jan 17 16:29:48 2001
    other than wanting to break the _bundle_ into smaller pieces, i

    That's all I needed to do. The bundle needs to be ported, on disk, to another system, and obviously, I don't have a 4 MEG floppy handy. Actually, there are plenty of workarounds, but I was hoping there -was- such a utility, for future use.

    well, if you run 4DOS or such,
    I don't.
    uggg... how do you run your system, then??

    Ask Jeff Schrunk at 1:3830/5, whom I just mystified with my "amazing" batchfiles. Something along the lines of the old Monty Python "Confuse-a-Cat" sketch. <LOL>

    with its single unblinking eye... some of what i used to do with
    .bat file majik is built in or at least infinitely easier with 4dos/4os2...

    It's not the kill, it's the thrill of the chase. :-)

    I use AMU to do this. I KNOW it'll work with the software
    you use, and it's free!
    true but at that time, i don't think it was... might have been but
    it was way too capable/involved for my needs... just archiving my

    It's a terribly powerful program, but not complex enough that you couldn't get the logfile processing up and running in about 10 minutes. I never DID sort out the file list generation, but that's for another echo. :-)

    logs (only two lines in a .BAT file for the rename and the pkzip
    command) into one huge archive is enough for me... that is, until i
    decide that i want to keep them and get them off onto floppies

    Or CDs.

    not a problem... hope you got yours taken care of...

    I will have it corrected shortly, and this will all be a moot point by tomorrow
    afternoon. :-)

    ---
    * Origin: Where'd you get the gun, John? (1:393/9005)
  • From Marc Lewis@1:396/45 to Steve Quarrella on Fri Jan 26 16:02:45 2001
    Hello Steve.

    <On 26Jan2001 10:03 Steve Quarrella (1:393/9005) wrote a message to Marc Lewis regarding Packet splitter >

    I will be the first to admit I'm ignorant or wrong, as I didn't
    really cling to the documentation when I had a look at it last
    week. I do know that PacketSorter will split large messages and
    rejoin them.

    Not sure about that one, Steve. Will research it a bit just for the heck of it.

    In any event, problem long since solved by putting the machine on
    the LAN and copying the file to where my point software could get
    it. <g> Thanks!

    Good show!

    PS: I heartily recommend this utility. It still works in 2001,
    and it works well.

    I use it heavily on the inbound packets from the NewsGate program, some of which get up into the multiple megs in size. The Y2k date correction program (PKTDATE.EXE) barfs on packets over ~150 messages, so I split everything down smaller than that.

    ::Later:: Pktsort will indeed split messages and unsplit them as well.

    Best regards,
    Marc

    --- timEd/386 1.10.y2k+
    * Origin: Sursum Corda! BBS New Orleans 1-504-897-6006 USR33k6 (1:396/45)
  • From Marc Lewis@1:396/45 to Steve Quarrella on Thu Jan 25 19:05:09 2001
    Hello Steve.

    <On 16Jan2001 19:30 Steve Quarrella (1:393/9005) wrote a message to All regarding Packet splitter >

    I've got a 4 MEG compressed bundle full of packets, and I'd like to
    break it up into disk-sized chunks. Anybody know of a good utility
    to do this? If worse comes to worse, I'll make a few copies and
    use something like InspectA to remove the packets inside of the
    copies, but that's -work.- :-)

    Here's what you need:

    -=-=-=-=-=-=-=-=-CUT-=-=-=-=-=-=-=-=-=-
    ~~
    PSRT_14.ZIP 269,266 04-26-94 PacketSorter v1.4 bug fixes & new features
    FidoNet inbound packet processor defragments
    packets, speeds up tossing on SQUISH and JAM:

    PacketSorter is a utility for defragmenting, splitting, unsplitting,
    cleaning and sorting inbound FidoNet (FTS-0001) message packets. It has
    been developed in the first place because the time the echomail tosser
    Squish needs to toss messsages into the messagebase heavily depends on
    the fragmentation level of the packets received. The packets you
    receive from your links are usually not sorted in any order.
    PacketSorter groups the messages contained in the packets by their area
    tag. On my system the packets defragmented with PacketSorter are tossed
    by Squish up to 5 times faster than the original packets. The
    performance gain you will notice depends on the tosser you use, the
    messagebase you use and the performance of your disk subsystem. People
    using a Hudson-style messagebase or a hardware cache controller for the
    harddisk may notice no performance gain at all. PacketSorter is not
    limited to be used only with Squish. You may use PacketSorter with any
    other echomail processor.
    -=-=-=-=-=-=-=-=-CUT-=-=-=-=-=-=-=-=-=-

    Best regards,
    Marc

    --- timEd/386 1.10.y2k+
    * Origin: Sursum Corda! BBS New Orleans 1-504-897-6006 USR33k6 (1:396/45)
  • From Steve Quarrella@1:393/9005 to Marc Lewis on Sat Jan 27 14:09:50 2001
    In any event, problem long since solved by putting the machine on
    the LAN and copying the file to where my point software could get
    it. <g> Thanks!
    Good show!

    And thus, you suddenly see your ol' RC responding to mail going back a month. :-)

    I use it heavily on the inbound packets from the NewsGate program,
    some of which get up into the multiple megs in size. The Y2k date correction program (PKTDATE.EXE) barfs on packets over ~150
    messages, so I split everything down smaller than that.

    Great minds think alike, as I also use that here. I've got a system in Net 393
    who's using software that generates bad dates, and he participates in Fidonet thanks to that program.

    ::Later:: Pktsort will indeed split messages and unsplit them as
    well.

    Messages, yes, but I don't think it will take an archive of PKTs and split them
    into smaller chunks.

    ---
    * Origin: Where'd you get the gun, John? (1:393/9005)
  • From Barry Blackford@3:774/605 to Steve Quarrella on Thu Apr 12 10:29:36 2001
    Hello there Steve!

    17 Jan 01 at 14:13, Steve Quarrella writes to Frank Vest:

    I havn't read here lately (abviously), so if this reply is irrelivant don't read on.

    And that's appreciated. Sometimes, you just have to use the
    trusty ol'
    mousetrap and forget about creating a new, more efficient one. By this evening, this'll be a moot point -- that 4 MEG is for 9005.13, which you know was recently left high and dry -- as I've got another system with my point software installed. It just remains to get the archive from this room to another room without a LAN. :-)

    Ah a sneakernet! I didn't think there were any of those left!
    I thought this was a 1-off? as it seems to be not, why not set fastech to a max
    archive size (Nodemgr/Max size) and be done with it?

    How would you reconfig FE to do that?

    See above..


    Best Rgds, Bazz
    barry@glonet.co.nz
    ---
    * Origin: Global NetWork ARGUS IP Mailer & FTP Fidonet New Zealand (3:774/605)
  • From Steve Quarrella@1:393/9005 to Barry Blackford on Thu Apr 19 06:14:34 2001
    17 Jan 01 at 14:13, Steve Quarrella writes to Frank Vest:
    I havn't read here lately (abviously),

    Yeah, I'd say. <g>

    Ah a sneakernet! I didn't think there were any of those left!

    I have since gotten the LAN up and running here, and got around my original issue quite easily. Given that I'm a LAN administrator in the real world, I'm a dead man without a little bit of ethernet in my life!

    I thought this was a 1-off? as it seems to be not, why not set
    fastech to a max archive size (Nodemgr/Max size) and be done with
    it?

    As I recall, the issue was splitting up a large packet. Doing what you suggest
    after the fact wouldn't have addressed the issue. <G>

    ---
    * Origin: Where'd you get the gun, John? (1:393/9005)
  • From Barry Blackford@3:774/605 to Steve Quarrella on Fri Apr 20 10:42:38 2001
    Hello there Steve!

    19 Apr 01 at 13:14, Steve Quarrella writes to Barry Blackford:

    17 Jan 01 at 14:13, Steve Quarrella writes to Frank Vest:
    I havn't read here lately (abviously),
    Yeah, I'd say. <g>

    :-)

    Ah a sneakernet! I didn't think there were any of those left!
    I have since gotten the LAN up and running here, and got around
    my original issue quite easily. Given that I'm a LAN
    administrator in the real world, I'm a dead man without a little
    bit of ethernet in my life!

    Yep, I was surprised at the sneakernet to say the least!

    I thought this was a 1-off? as it seems to be not, why not set
    fastech to a max archive size (Nodemgr/Max size) and be done with
    it?

    As I recall, the issue was splitting up a large packet. Doing what you suggest after the fact wouldn't have addressed the issue. <G>

    Oh well, my next suggestion was to use "SPLIT" which can be run from a batch file to split the files into specified sizes, it may help someone else, you never now..?

    Best Rgds, Bazz
    barry@glonet.co.nz
    ---
    * Origin: Global NetWork ARGUS IP Mailer & FTP Fidonet New Zealand (3:774/605)