Hello All!

When I try to add 6:653/1500 to the "Export to" field in Group Area Defaults, It gives me an error message: Poings can't handle multiple downlinks.
Before adding 6:653/1500, there is only 3:774/605 in the Export to field. And seen-by is 6:653/1501. Even if I add 1500 to "export to", it doesn't export ANY mail to 6:653/1500.

What shall I do so that it can work properly?

Best Regards,
Lawrence * llancaster2000@eastday.com
---
* Origin: -= Belldandy Club Gateway =- [PVT] (6:653/1501)

Hello Lawrence,

23 Jul 00 10:48, Lawrence Lancaster wrote to All:

When I try to add 6:653/1500 to the "Export to" field in Group Area Defaults, It gives me an error message: Poings can't handle multiple downlinks. Before adding 6:653/1500, there is only 3:774/605 in the
Export to field. And seen-by is 6:653/1501. Even if I add 1500 to
"export to", it doesn't export ANY mail to 6:653/1500.

What shall I do so that it can work properly?

It sounds to me that you have a point system key -or- that your primary FTN address is a point address. Double-check your address setup and remove any point entry. If you have a point key you will need to upgrade that to a regular
key.

-=David=-
TCP/IP Node kraut.dyndns.org IBN & ITN:60177
David@you-have-mail.com

... Reality is for people who can't cope with their drugs.
---
* Origin: Kraut Haus * telnet://kraut.dyndns.org (1:2613/404)

Day

Have you added the node to the Nodes Configuration as I just checked it here and works okay on my system
Bob



* In a message originally to All, Lawrence Lancaster
said:

605
Hello All!

When I try to add 6:653/1500 to the "Export to" field in Group Area Defaults,
It gives me an error message: Poings can't handle multiple downlinks.
Before adding 6:653/1500, there is only 3:774/605 in the Export to field. And
seen-by is 6:653/1501. Even if I add 1500 to "export to", it doesn't
export
ANY mail to 6:653/1500.

What shall I do so that it can work properly?

Best Regards,
Lawrence * llancaster2000@eastday.com
---
* Origin: -= Belldandy Club Gateway =- [PVT] (6:653/1501)

---
* Origin: Phantom Connection BBS (3:712/311)

Bob James wrote in a message to Lawrence Lancaster:

Day

Have you added the node to the Nodes Configuration as I just
checked it here and works okay on my system
Bob

I finally found what was the problem.
I used a _Point_ key instead of a Node Key.
I have solved it. Thanks. :))


Best Regards,
Lawrence * llancaster2000@eastday.com
---
* Origin: -= Belldandy Club - Gateway =- [PVT] (6:654/1501)

David Moufarrege wrote in a message to Lawrence Lancaster:

Hello Lawrence,

What shall I do so that it can work properly?

It sounds to me that you have a point system key -or- that your
primary FTN address is a point address. Double-check your address
setup and remove any point entry. If you have a point key you will
need to upgrade that to a regular key.

Thanks.
I found that I used a wrong key. :)

Best Regards,
Lawrence * llancaster2000@eastday.com
---
* Origin: -= Belldandy Club - Gateway =- [PVT] (6:654/1501)

Scanning JAM areas ...

Can't export message in area HNET_TEST without active downlinks.

Scanning Squish areas ...


NetMail: 0, EchoMail: 0

I've got node, seen-by and export set. What could I be doing wrong? I've
had this before and I have no clue what I did to fix it...

--
Shurato, Sysop Shurato's Heavenly Sphere (ssh, telnet, pop3, ftp,nntp,
,wss) (Ports 22,23,110,21,119,999)


*** THE READER V4.50 [freeware]
---
* Origin: Shurato's Heavenly Sphere telnet://shsbbs.net (1:340/1101)

Hey Martin!

On Sun, 26 Oct 2025 13:12:00 , you wrote:

Scanning JAM areas ...

Can't export message in area HNET_TEST without active downlinks.

Scanning Squish areas ...

NetMail: 0, EchoMail: 0

I've got node, seen-by and export set. What could I be doing wrong?
I've had this before and I have no clue what I did to fix it...

Well, I don't know much about fastecho, but the error says you can't /export/ message in area HNET_TEST without /active downlinks/.

So, I would imagine, if you don't have any active downlinks for that area, you don't need to export anything for it (ie: unset export, since you said you set it).

Regards,
Nick

... Sarcasm: because beating people up is illegal.
--- GoldED+/LNX 1.1.5-b20250409
* Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (1:154/10)

* In a message originally to Martin Kazmaier, Nick Boel said:

Hey Martin!

On Sun, 26 Oct 2025 13:12:00 , you wrote:

Scanning JAM areas ...

Can't export message in area HNET_TEST without active downlinks.

Scanning Squish areas ...

NetMail: 0, EchoMail: 0

I've got node, seen-by and export set. What could I be doing wrong?
I've had this before and I have no clue what I did to fix it...

Well, I don't know much about fastecho, but the error says you can't /export/ message in area HNET_TEST without /active downlinks/.

So, I would imagine, if you don't have any active downlinks for that area, you don't need to export anything for it (ie: unset export, since you said you set it).

Export to is set, and that's the downlinks. Turns out I think it was a VM error. I'd changed some settings, but they hadn't taken effect.

--
Shurato, Sysop Shurato's Heavenly Sphere (ssh, telnet, pop3, ftp,nntp,
,wss) (Ports 22,23,110,21,119,999)


---
* Origin: Shurato's Heavenly Sphere telnet://shsbbs.net (1:340/1101)

Hey Martin!

On Sun, 26 Oct 2025 13:12:00 , you wrote:

Scanning JAM areas ...

Can't export message in area HNET_TEST without active downlinks.

Scanning Squish areas ...

NetMail: 0, EchoMail: 0

I've got node, seen-by and export set. What could I be doing wrong? I've had this before and I have no clue what I did to fix it...

Well, I don't know much about fastecho, but the error says you can't /export/ message in area HNET_TEST without /active downlinks/.

So, I would imagine, if you don't have any active downlinks for that area, you don't need to export anything for it (ie: unset export, since you said you set it).

Name: HNET_TEST Group: C Comment: [Auto-Added]
Origin: Shurato's Heavenly Sphere telnet://shsbbs.net
Type: EchoMail
Storage: JAM Board:
Path: C:\ELE\MSGBASE\JAM\FE6A9E10
Use AKA: 954:300/2

Mandatory: N Keep SEEN-BY: N Tiny SEEN-BY: N CPD: N Passive: N
Convert Umlaut: N Keep users: N Kill read: N Disable Passive: N
Remote changes: Y Hide area: N Keep NetMail: N

Purging # Msgs: 5000 # Days: 0 # Rcvd Days: 0
Security Read: 10 Write: 100

Seen-by: 954:300/2
Export to: 954:895/2

As you can see, I DO have downlinks set... What could I possibly be doing wrong? I've tried removing export to, but that gives the same error. My VM often ignores obvious changes that I've definitely made and no one has any
idea why... That's all I can think is going on.

--
Shurato, Sysop Shurato's Heavenly Sphere (ssh, telnet, pop3, ftp,nntp,
,wss) (Ports 22,23,110,21,119,999)


*** THE READER V4.50 [freeware]
---
* Origin: Shurato's Heavenly Sphere telnet://shsbbs.net (1:340/1101)

28 Oct 25 19:29, Martin Kazmaier wrote to Nick Boel:

Export to: 954:895/2

As you can see, I DO have downlinks set...

"Can't export message in area HNET_TEST without active downlinks."

Is that link 954:895/2 active?

'Tommi

--- FastEcho/2 1.46.1 Revival
* Origin: =========================>>>> (2:221/1.254)

29 Oct 25 14:49, Tommi Koivula wrote to Martin Kazmaier:

28 Oct 25 19:29, Martin Kazmaier wrote to Nick Boel:

Export to: 954:895/2

As you can see, I DO have downlinks set...

"Can't export message in area HNET_TEST without active downlinks."

Is that link 954:895/2 active?

|##
AreaFix flags: ╗ | #
|##
Send Notify: Y |##
Send Help: Y |##
|##
Passive: N |##
Automatic Passive: 0 |##
|##
==================================+##
#####################################
#####################################


Check those two last options.

'Tommi

--- FastEcho/2 1.46.1 Revival
* Origin: =========================>>>> (2:221/1.254)

Hey Martin!

On Sun, 26 Oct 2025 13:12:00 , you wrote:

Scanning JAM areas ...

Can't export message in area HNET_TEST without active downlinks.

Scanning Squish areas ...

NetMail: 0, EchoMail: 0

I've got node, seen-by and export set. What could I be doing wrong? I've had this before and I have no clue what I did to fix it...

Well, I don't know much about fastecho, but the error says you can't /export/ message in area HNET_TEST without /active downlinks/.

So, I would imagine, if you don't have any active downlinks for that area, you don't need to export anything for it (ie: unset export, since you said you set it).

Ok, again I delete my directory structure, recreated it and everything
started working again. VMs are weird.

--
Shurato, Sysop Shurato's Heavenly Sphere (ssh, telnet, pop3, ftp,nntp,
,wss) (Ports 22,23,110,21,119,999)


*** THE READER V4.50 [freeware]
---
* Origin: Shurato's Heavenly Sphere telnet://shsbbs.net (1:340/1101)

On 26 Oct 2025, Nick Boel said the following...

Hey Martin!

Can't export message in area HNET_TEST without active downlinks.

Nicholas, Shurato is having issues with Netmail so I'm wondering what's going on here with exporting messages. Have you gotten netmail messages from him?
I need to resolve his issue with my system. He sent a packet and my system handled what he said was a netmail message was processed by my Mystic system
as an echomail message. Just curious to see what the hiccup is. I don't
know anything about Fastecho either. I've used BinkD, Mystic, Synchronet's BinkIt and Taurus/Radius and some others, I don't think it's a mailer issue.
I think it's more of how the message is being saved. It should be posted to AreaFix (@ my FTN) with his password and all that regards in a netmail based message base.

-- cr1mson

--- Mystic BBS v1.12 A47 2020/09/12 (Linux/64)
* Origin: Raiders Inc BBS telnet raidersbbs.zapto.org:1337 (1:220/20)

Hey Jon!

On Sun, 02 Nov 2025 00:30:28 +0000, you wrote:

Nicholas, Shurato is having issues with Netmail so I'm wondering what's going on here with exporting messages.

I have no idea without any logs or a clue as to what's happening.

Have you gotten netmail messages from him? I need to resolve his
issue with my system.

No. Nor do I even know if he attempted to send me one. I haven't heard anything, and with what he had originally posted it didn't look like it had anything to do with netmail.

He sent a packet and my system handled what he said was a netmail
message was processed by my Mystic system as an echomail message.
Just curious to see what the hiccup is. I don't know anything about Fastecho either. I've used BinkD, Mystic, Synchronet's BinkIt and Taurus/Radius and some others, I don't think it's a mailer issue. I
think it's more of how the message is being saved. It should be
posted to AreaFix (@ my FTN) with his password and all that regards
in a netmail based message base.

I would tend to agree it's not a mailer issue. It's possible EleBBS has a different way to save/pack netmail that maybe isn't set right. Or if all that is set right, then the same kind of settings would have to be used in Fastecho. If EleBBS is saving the message as echomail, Fastecho will pass it on as echomail.

Regards,
Nick

... Sarcasm: because beating people up is illegal.
--- GoldED+/LNX 1.1.5-b20250409
* Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (1:154/10)