• BBS

    From Rick Smith@1:105/81 to All on Tue Feb 28 22:19:10 2023
    Hello All!

    I got vmodem working finally... well sort of. I can get renegade, pb 217 (only) and maximus to intialize the modem no problem. The problem I see now is that only maximus passes anything to my telnet client. The rest all show connected but blank screen is all I get. Because its more than one bbs software doing this I assume its some setting somewhere for modem perhaps in the setup of the bbs?

    I am using netrunner to connect, I have not tried syncterm which I will do later to see if different result.

    Regards,

    Rick

    ... Because of BBSing, reading and writing actually pay off!
    --- GoldED+/LNX 1.1.5-b20220504
    * Origin: Awesome Net- Oregon FTN Hub - www.awesomenet.us (1:105/81)
  • From Dave Vandermeer@1:229/275 to Rick Smith on Sat Mar 4 16:18:00 2023

    * In a message originally to All, Rick Smith said:

    I got vmodem working finally... well sort of. I can get renegade, pb 217 (only) and maximus to intialize the modem no problem. The problem I see now is that only maximus passes anything to my telnet client. The rest
    all show connected but blank screen is all I get. Because its more than one bbs software doing this I assume its some setting somewhere for modem perhaps in the setup of the bbs?

    Vhat version of SIO? I am using SIO2k v2.11 I think with VX00 installed and 8 telnet ports and I have pretty much gotten everything to answer telnet calls with both DOS and OS/2 BBS software ..

    If you can't get the software to answer calls, try changing the init string to just ATZ and any other hayes commands to manipulate speaker and stuff. hangup string ATH answer string ATA detect RING answer on 2nd RING .. should pretty much cover any situation .. at least in my experience

    Good luck .. I am testing out the telnet/news/ftp server of EleBBS/2 currently :D so far everything works as expected.

    ---
    * Origin: internal dimension v2 - telnet://bbs.idbbs.ca (1:229/275)
  • From T.J. Mcmillen@1:129/305 to Dave Vandermeer on Sat Mar 4 19:30:24 2023
    Vhat version of SIO? I am using SIO2k v2.11 I think with VX00 installed an

    ^^^^^^^^^^^^^^^^

    Wasn't 2.01 beta (like July 2001) the last ver Ray put out?

    ... On one condition -- that it leads to extreme violence!

    --- Renegade v1.31/Exp
    * Origin: The Titantic BBS Telnet - ttb.rgbbs.info (1:129/305)
  • From Andrew Leary@1:320/219 to T.J. Mcmillen on Sun Mar 5 00:10:50 2023
    Hello T!

    04 Mar 23 19:30, you wrote to Dave Vandermeer:

    Vhat version of SIO? I am using SIO2k v2.11 I think with VX00
    installed an

    ^^^^^^^^^^^^^^^^

    Wasn't 2.01 beta (like July 2001) the last ver Ray put out?

    The last release that I'm aware of was v2.03 from June, 2002.

    Andrew

    --- GoldED+/LNX 1.1.5-b20230304
    * Origin: Phoenix BBS * phoenix.bnbbbs.net (1:320/219)
  • From Rick Smith@1:105/81 to Dave Vandermeer on Mon Mar 6 06:54:32 2023
    Hello Dave!

    Saturday March 04 2023 16:18, you wrote to me:


    * In a message originally to All, Rick Smith said:

    I got vmodem working finally... well sort of. I can get renegade,
    pb 217 (only) and maximus to intialize the modem no problem. The
    problem I see now is that only maximus passes anything to my telnet
    client. The rest all show connected but blank screen is all I get.
    Because its more than one bbs software doing this I assume its some
    setting somewhere for modem perhaps in the setup of the bbs?

    Vhat version of SIO? I am using SIO2k v2.11 I think with VX00
    installed and 8 telnet ports and I have pretty much gotten everything
    to answer telnet calls with both DOS and OS/2 BBS software ..

    If you can't get the software to answer calls, try changing the init string to just ATZ and any other hayes commands to manipulate speaker
    and stuff. hangup string ATH answer string ATA detect RING answer on
    2nd RING .. should pretty much cover any situation .. at least in my experience

    Can you share the enty in your config.sys? Thats where I think mine is failing...

    Regards,

    Rick

    ... I don't do drugs...BBSing is my escape from reality
    --- GoldED+/LNX 1.1.5-b20220504
    * Origin: Awesome Net- Oregon FTN Hub - www.awesomenet.us (1:105/81)
  • From Daniel Path@2:371/52 to Rick Smith on Thu Mar 9 14:44:06 2023
    Hello Rick,

    06 Mar 23 06:54, you wrote to Dave Vandermeer:

    Hello Dave!

    Saturday March 04 2023 16:18, you wrote to me:


    * In a message originally to All, Rick Smith said:

    I got vmodem working finally... well sort of. I can get renegade,
    pb 217 (only) and maximus to intialize the modem no problem. The
    problem I see now is that only maximus passes anything to my
    telnet client. The rest all show connected but blank screen is
    all I get. Because its more than one bbs software doing this I
    assume its some setting somewhere for modem perhaps in the setup
    of the bbs?

    Vhat version of SIO? I am using SIO2k v2.11 I think with VX00
    installed and 8 telnet ports and I have pretty much gotten
    everything to answer telnet calls with both DOS and OS/2 BBS
    software ..

    If you can't get the software to answer calls, try changing the
    init string to just ATZ and any other hayes commands to
    manipulate speaker and stuff. hangup string ATH answer string ATA
    detect RING answer on 2nd RING .. should pretty much cover any
    situation .. at least in my experience

    Can you share the enty in your config.sys? Thats where I think mine is failing...

    my config.sys:

    device=C:\sio2k\vmodem.sys logfile=C:\sio2k\sio2k.log NoPause nPorts=8 device=C:\sio2k\uart.sys logfile=C:\sio2k\sio2k.log
    device=C:\sio2k\sio2k.sys logfile=C:\sio2k\sio2k.log
    device=C:\sio2k\vsio2k.sys logfile=C:\sio2k\vsio2k.log vIrqList(3,4)


    Regards,
    --
    dp

    telnet://bbs.roonsbbs.hu:1212 <<=-

    ... 3:34pm up 23 days, 0:33:07, load: 88 processes, 286 threads.
    --- GoldED/2 1.1.4.7+EMX
    * Origin: Roon's BBS - Budapest, HUNGARY (2:371/52)