From: sinip@hamhq.yfnet.org.yu (SINISA PAVLOVIC)
Reply-To: sinip@hamhq.yfnet.org.yu (SINISA PAVLOVIC)

Is there anybody here who uses AdeptX/Orion BBS software?

What I would like to know is wether AdeptX can be made to somehow
trigger Injoy to connect to ISP, establish TCP/IP and exchange
news/e-mail messages automaticly, couple of times per day?

There was mentioned in the manual that there would be an Internet
connection package made available for that BBS software. Any information
about that, and in general, who would be kind enough to help me setup
that BBS, if I get stuck somewhere?

I decided to go for AdeptX/Orion software against BBBS, because from
reading both manuals I find BBBS setup to be completely beyond my comprehention. :-))

Thanks in advance.

mailto:4n4da@qsl.net

--- FIDOGATE 4.4.1
* Origin: fido.org.yu domain gateway (2:382/5.0)

Quoting SINISA PAVLOVIC to All <=-

From: sinip@hamhq.yfnet.org.yu (SINISA PAVLOVIC)
Reply-To: sinip@hamhq.yfnet.org.yu (SINISA PAVLOVIC)

Is there anybody here who uses AdeptX/Orion BBS software?

What I would like to know is wether AdeptX can be made to somehow
trigger Injoy to connect to ISP, establish TCP/IP and exchange
news/e-mail messages automaticly, couple of times per day?

When I was running Adept I just set InJoy for DialonDemand mode. It would initialize the modem, and then just sit there. Mean while, Adept deals with inbound/outbound FTSC calls, and when it's time to hit the net, Adept does a simple tcp/ip connect attmept. Injoy flags that and dials out. Then when The event is done, Adept re-initializes the modem, forcing it to hangup. InJoy notices this and returns to Dial on Demand mode.

I decided to go for AdeptX/Orion software against BBBS, because from reading both manuals I find BBBS setup to be completely beyond my comprehention. :-))

BBBS isn't that bad when you get the hang of it. It just takes patience. There's a ton of sysops who would be more than happy to help you out if you went over to the bbbs.english echo. Myself included.



... Sub-titled in HEX for programmers

--- BBBS/LiI v4.00 MP
* Origin: Short Circuit BBS (1:140/50)

Sinisa Pavlovic,

29-Jan-01 00:19:00, SINISA PAVLOVIC wrote to All
Subject: AdeptX BBS question

Is there anybody here who uses AdeptX/Orion BBS software?

I use Adept adf111y.zip

I do not use Orion, since in spite of the more recent date, it never got
past the alpha/beta test stage, AFAIK. Too many reports of major problems
with it.

If possible you should attempt to AreaFix the ADEPT_SYSOP echo, where you
will find more help.

What I would like to know is wether AdeptX can be made to somehow
trigger Injoy to connect to ISP,

Yes with an event.

--- Excerpt \Adept\Events\Events.Text.1 ---
EVENTBEGIN
NAME Forced Close Port Run Auto-Pilot
COMMAND CMD.EXE /c Auto-Pilot.CMD
START 00:05
LENGTH 2
END 00:07
DAYOFWK 1024
FLAGS 17411
CALLTIME 1800
MAXBAD 5
MAXTRIES 30
LASTRAN 1
EVENTEND
---

Be careful with your FLAGS. In that case it closes the land line modem
port so that modem becomes free for use by InJoy. It also forces that
event to run and waits for it to finish before going to the next event.

establish TCP/IP and exchange news/e-mail messages

Although I avoid NewsGroups I do think that will work. As for E-Mail
AFAIK that would require a static IP address and a registered domain
name (although DynIP might work). I sold my domain name before I got
around to trying E-Mail directly into Adept.

I use Mr/2Ice for E-Mail and I could use that for NewsGroups as well.
But of course that does not post those msgs into the Adept msg-base.

automaticly, couple of times per d

Replying to a message from SINISA PAVLOVIC 2:382/5 to All,

About AdeptX BBS question, On Mon Jan 29 2001

Is there anybody here who uses AdeptX/Orion BBS software?

Yup a few of us.

What I would like to know is wether AdeptX can be made to somehow
trigger Injoy to connect to ISP, establish TCP/IP and exchange
news/e-mail messages automaticly, couple of times per day?

NP I do just that 4 times per day. You need to setup an event in your event file, I will put mine in here.

EVENTBEGIN
NAME Late Night
COMMAND CMD.EXE /c maint.cmd
START 00:01
LENGTH 14
END 00:15
DAYOFWK 1024
FLAGS 2065
CALLTIME 480
MAXCOST 200
MAXBAD 10
MAXTRIES 200
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME Late Night
START 00:16
LENGTH 44
END 01:00
DAYOFWK 1024
FLAGS 2128
CALLTIME 480
MAXCOST 200
MAXBAD 10
MAXTRIES 200
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME ZMH
START 01:00
LENGTH 60
END 02:00
DAYOFWK 1024
FLAGS 2122
CALLTIME 480
MAXCOST 200
MAXBAD 10
MAXTRIES 200
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME Late Night
START 02:00
LENGTH 150
END 04:30
DAYOFWK 1024
FLAGS 2128
CALLTIME 480
MAXCOST 200
MAXBAD 10
MAXTRIES 200
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME Get Mail
COMMAND CMD.EXE /c getit.cmd
START 04:30
LENGTH 1
END 04:31
DAYOFWK 1024
FLAGS 17409
CALLTIME 480
MAXBAD 10
MAXTRIES 200
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME Day Rates
START 04:31
LENGTH 359
END 10:30
DAYOFWK 1024
FLAGS 16
CALLTIME 1800
MAXBAD 5
MAXTRIES 30
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME Get Mail
COMMAND CMD.EXE /c getit.cmd
START 10:30
LENGTH 1
END 10:31
DAYOFWK 1024
FLAGS 17409
CALLTIME 480
MAXBAD 10
MAXTRIES 200
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME Day Rates
START 10:31
LENGTH 359
END 16:30
DAYOFWK 1024
FLAGS 16
CALLTIME 1800
MAXBAD 5
MAXTRIES 30
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME Get Mail
COMMAND CMD.EXE /c getit.cmd
START 16:30
LENGTH 1
END 16:31
DAYOFWK 1024
FLAGS 17409
CALLTIME 480
MAXBAD 10
MAXTRIES 200
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME Day Rates
START 16:31
LENGTH 29
END 17:00
DAYOFWK 1024
FLAGS 16
CALLTIME 1800
MAXBAD 5
MAXTRIES 30
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME Evening Rates
START 17:00
LENGTH 330
END 22:30
DAYOFWK 1024
FLAGS 16
CALLTIME 1800
MAXBAD 5
MAXTRIES 30
LASTRAN 1
EVENTEND
EVENTBEGIN
NAME Get Mail
COMMAND CMD.EXE /c getit.cmd
START 22:30
LENGTH 1
END 22:31
DAYOFWK 1024
FLAGS 17409
CALLTIME 480
MAXBAD 10
MAXTRIES 200
LASTRAN 31
EVENTEND
EVENTBEGIN
NAME Night Rates Again
START 22:31
LENGTH 88
END 23:59
DAYOFWK 1024
FLAGS 2128
CALLTIME 480
MAXCOST 200
MAXBAD 20
MAXTRIES 200
LASTRAN 31
EVENTEND

e:
cd injoy
in-joy.exe

You need to setup Injoy to automatically call up your email/news reader client after a connection is made. Once done voila automated news and mail retrieval

Thanks in advance.

No Problem

Hope this helps. Keep us posted.

We are a fine board trying to make it better.
http://www.pris.bc.ca/ghannah
ghannah@pris.bc.ca
Cheers! Gord
-=Team OS/2=-
--- timEd/2 1.10.y2k+
* Origin: Marsh BBS (c) [Dawson Creek BC Canada] 1-250-786-7921 (1:17/23.1)

Quoting SINISA PAVLOVIC to All <=-

From: sinip@hamhq.yfnet.org.yu (SINISA PAVLOVIC)
Reply-To: sinip@hamhq.yfnet.org.yu (SINISA PAVLOVIC)

Is there anybody here who uses AdeptX/Orion BBS software?

What I would like to know is wether AdeptX can be made to somehow
trigger Injoy to connect to ISP, establish TCP/IP and exchange
news/e-mail messages automaticly, couple of times per day?

When I was running Adept I just set InJoy for DialonDemand mode. It would initialize the modem, and then just sit there. Mean while, Adept deals with inbound/outbound FTSC calls, and when it's time to hit the net, Adept does a simple tcp/ip connect attmept. Injoy flags that and dials out. Then when The event is done, Adept re-initializes the modem, forcing it to hangup. InJoy notices this and returns to Dial on Demand mode.

I decided to go for AdeptX/Orion software against BBBS, because from reading both manuals I find BBBS setup to be completely beyond my comprehention. :-))

BBBS isn't that bad when you get the hang of it. It just takes patience. There's a ton of sysops who would be more than happy to help you out if you went over to the bbbs.english echo. Myself included.



... Sub-titled in HEX for programmers

--- BBBS/LiI v4.00 MP
* Origin: Short Circuit BBS (1:140/50)

Hello SINISA!

Monday January 29 2001, SINISA PAVLOVIC writes to All:

Is there anybody here who uses AdeptX/Orion BBS software?

Look in the Adept_sysop echo.


Vince

--- Maximus v3.01/GoldED/2 2.50+#10UK3 under OS/2
* Origin: Air Applewood; OS/2 Gateway to Essex +44-1279-792300 (2:257/609)