• Cursor Driven Menus..

    From Bucko@21:4/131 to All on Sat Oct 2 22:58:14 2021
    Hey all, for those using Cursor driven menus, is there a way to make sure
    when a user enters that menu the cursor is at the first choice? I have set
    the X and Y co-ordinates in the settings on the menu but it always defaults
    to where I left off.. Any ideas??

    Thanks..

    AL

    --- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From paulie420@21:2/150 to Bucko on Sat Oct 2 22:06:59 2021
    Hey all, for those using Cursor driven menus, is there a way to make sure when a user enters that menu the cursor is at the first choice? I have
    set the X and Y co-ordinates in the settings on the menu but it always defaults to where I left off.. Any ideas??

    Thanks..
    AL

    Gosh darnit, I had this issue before... fixed it... and can't remember how I figured that issue. Mystic is odd at times and seems like it doesn't do that on every menu, but sometimes. Its something we're doing, but...

    I do remember that once when I hit that, adding another menu item changed the end result and it went back to the upper-left 1st selection. That isn't much help; if I poke around and remember I'll post back.



    |07p|15AULIE|1142|07o
    |08.........

    --- Mystic BBS v1.12 A47 2021/08/29 (Raspberry Pi/32)
    * Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)
  • From Bucko@21:4/131 to paulie420 on Sun Oct 3 07:22:27 2021
    On 02 Oct 2021, paulie420 said the following...

    I do remember that once when I hit that, adding another menu item
    changed the end result and it went back to the upper-left 1st selection. That isn't much help; if I poke around and remember I'll post back.


    Thanks Paulie, it's driving me nuts. I have had my main menu as Cursor driven for quite a while and now am redoing all of my menus to lightbar/grid menus
    and this one thing is getting me. LOL Still a ways off before I release the
    new menus on the board (Doors menus will be done this week) then the rest hopefully 1 or 2 a day.

    Oh well...

    Al

    --- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Accession@21:1/200 to Bucko on Mon Oct 4 16:55:30 2021
    On 03 Oct 2021, Bucko said the following...

    Thanks Paulie, it's driving me nuts. I have had my main menu as Cursor driven for quite a while and now am redoing all of my menus to lightbar/grid menus and this one thing is getting me. LOL Still a ways
    off before I release the new menus on the board (Doors menus will be
    done this week) then the rest hopefully 1 or 2 a day.

    --- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)

    My first suggestion would be to upgrade to the latest prealpha. It's possible this was already addressed sometime in the past year and two months.

    I use grid for all of my lightbar menus here, mainly just to be able to utilize all four directions, and have never seen this issue before.. then again, I don't think I saw it in A46 either, but that's too long ago to remember.

    Do you have "Redraw After" for each menu item set to yes? If not, try that. Otherwise, that's really the only thing I can think of out of the ordinary. If that doesn't work, I/we may need some more specifics or possibly some screenshots of your configuration (Menu Options, Menu Settings (/ in menu options menu), and what the output looks like would be a good place to start).

    Every time a menu is loaded it should always go to the first command in the menu, unless maybe the menu isn't exited properly? Are you possibly using GoSubs and returns? If you are, then I'd imagine you're not actually exiting the menu and restarting it when you return, so things will be left where you originally left it. In that case, I would try using the GO action command instead of GS. That way it actually exits the lightbar menu, and when you use GO to go back to the lightbar menu it will start it up fresh again.

    Hope one of those helps ya!

    Regards,
    Nick

    --- Mystic BBS v1.12 A47 2021/09/29 (Linux/64)
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (21:1/200)
  • From Bucko@21:4/131 to Accession on Mon Oct 4 19:27:19 2021
    On 04 Oct 2021, Accession said the following...


    --- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)

    My first suggestion would be to upgrade to the latest prealpha. It's possible this was already addressed sometime in the past year and two months.


    Didn't even realize A46 was this old.. That is on my list now to upgrade to A47..
    I use grid for all of my lightbar menus here, mainly just to be able to utilize all four directions, and have never seen this issue before..
    then again, I don't think I saw it in A46 either, but that's too long
    ago to remember.

    Do you have "Redraw After" for each menu item set to yes? If not, try that. Otherwise, that's really the only thing I can think of out of the ordinary. If that doesn't work, I/we may need some more specifics or possibly some screenshots of your configuration (Menu Options, Menu Settings (/ in menu options menu), and what the output looks like would
    be a good place to start).

    Redraw after is on with each menu item. I will double check all settings, everything works great, just the first option isn't always chosen. I will double check my settings again..


    Every time a menu is loaded it should always go to the first command in the menu, unless maybe the menu isn't exited properly? Are you possibly using GoSubs and returns? If you are, then I'd imagine you're not
    actually exiting the menu and restarting it when you return, so things will be left where you originally left it. In that case, I would try
    using the GO action command instead of GS. That way it actually exits
    the lightbar menu, and when you use GO to go back to the lightbar menu
    it will start it up fresh again.


    No gosubs, or returns, Just plain go commands.

    Hope one of those helps ya!

    Regards,

    Thanks for the help.. I Will give all the settings another lookover and see what I come up with...

    AL

    --- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Bucko@21:4/131 to Bucko on Sat Oct 30 13:56:34 2021
    On 04 Oct 2021, Bucko said the following...

    Didn't even realize A46 was this old.. That is on my list now to upgrade to A47..
    I use grid for all of my lightbar menus here, mainly just to be able utilize all four directions, and have never seen this issue before.. then again, I don't think I saw it in A46 either, but that's too long ago to remember.


    Just as an add on to this, I fixed my issue but moving the command that I wanted to be first to the top of the list. Once doing that it goes to that option all the time.. Thanks for the help..

    Al

    ... Isn’t it a bit unnerving that doctors call what they do "practice"?

    --- Mystic BBS v1.12 A47 2021/10/25 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)