1. Forum
  2. fsxNet
  3. FSX GEN

  • Homelabs and noise

    From poindexter FORTRAN@21:4/122 to All on Sun May 26 10:51:00 2024
    shoulda, woulda, coulda...

    A couple of years ago I had some cable pullers come in and run a
    backbone between floors. I so should have had him run a couple of runs
    to my storage space.

    I have a homelab with a laptop running Proxmox, an old Synology NAS, a
    laptop fan keeping the server cool, and an external USB drive as a
    backup target.

    The laptop fan is starting to make noise. Now that it's getting warmer
    here, the NAS fans are kicking in more often. The external drive makes a
    clunk every once in a while. The NAS has 5 2TB spinning drives
    chattering away...

    If I had those runs into the storage space, I could have a nice, cool, soundproof space for my servers.

    I may need to move some of my equipment around into a storage armoire - currently, they're sitting on top. By putting them inside, they'll be
    quieter, but I'm worried about heat buildup.



    ... Don't bite the hand that feeds you WiFi.
    --- MultiMail/Win v0.52
    * Origin: realitycheckBBS.org -- information is power. (21:4/122)
  • From Spectre@21:3/101 to poindexter FORTRAN on Mon May 27 20:37:00 2024
    I may need to move some of my equipment around into a storage armoire -

    Is an armoire one of them fancy schmancy uptown server cabinets? :)

    Spec


    *** THE READER V4.50 [freeware]
    --- SuperBBS v1.17-3 (Eval)
    * Origin: Good Luck and drive offensively! (21:3/101)
  • From poindexter FORTRAN@21:4/122 to Spectre on Sun May 26 20:27:23 2024
    Re: Homelabs and noise
    By: Spectre to poindexter FORTRAN on Mon May 27 2024 08:37 pm

    Is an armoire one of them fancy schmancy uptown server cabinets? :)

    It's a cabinet with two swinging doors on the top half and lots of cubby drawers on the bottom. The Cabinet had my printers and CD binders, office supplies and so on, and the "homelab" sits on top.
    --- SBBSecho 3.20-Win32
    * Origin: realitycheckBBS.org -- information is power. (21:4/122)
  • From paulie420@21:2/150 to poindexter FORTRAN on Mon May 27 13:47:21 2024
    I may need to move some of my equipment around into a storage armoire - currently, they're sitting on top. By putting them inside, they'll be quieter, but I'm worried about heat buildup.

    Nah - you don't have tons of equipment... you'd be surpised how much air a boxfan will move across/thru your equipment rack. That being said, there are server/homenet specific products [not a box fan] that will do the same...

    In your space that you described, I would put 8U worth of servers and other hardware... you'll be just fine IMO.



    |07p|15AULIE|1142|07o
    |08.........

    --- Mystic BBS v1.12 A48 (Linux/64)
    * Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)
  • From claw@21:1/210 to poindexter FORTRAN on Tue May 28 07:52:32 2024
    On 26 May 2024, poindexter FORTRAN said the following...

    shoulda, woulda, coulda...

    A couple of years ago I had some cable pullers come in and run a
    backbone between floors. I so should have had him run a couple of runs
    to my storage space.

    I get that but why not run it yourself? I have my lab in the basement of my house so its always cold year round. You can always get a point to point connection with Ubuquity. I'm sure I spelt that wrong but they go miles in the open and if you need to turn it up though many solid things. I use one to sync up my garage so I can have good Wifi in the back yard. Having a plaster house not much gets in our out through that chicken wire.

    |23|04Dr|16|12Claw
    |16|14Sysop |12Noverdu |14BBS |20|15Radio|10@|14HTTP://Noverdu.com:88
    |16|10 Standard ports for SSH/Telnet |04 WEB|14@|12HTTP://noverdu.com:808 |20|15Global Chat, Global Messaging and Games! |16|10Ditch the Unsocial Media

    --- Mystic BBS v1.12 A47 2021/12/24 (Linux/64)
    * Origin: Noverdu BBS (21:1/210)
  • From poindexter FORTRAN@21:4/122 to claw on Tue May 28 07:21:00 2024
    claw wrote to poindexter FORTRAN <=-

    A couple of years ago I had some cable pullers come in and run a
    backbone between floors. I so should have had him run a couple of runs
    to my storage space.

    I get that but why not run it yourself?

    I had to run the cabling between floors, I was happy to have them
    figure out the best route - because I would have been way off!

    I've done structured cabling for years, but with cable trays, sleeves,
    conduits and before drywall goes up - I'm out of my element in a house.
    :)


    ... Always the first steps
    --- MultiMail/Win v0.52
    * Origin: realitycheckBBS.org -- information is power. (21:4/122)