• Stupid question time..

    From Bucko@21:4/131 to All on Sat Feb 1 17:19:27 2020
    Jeez, it's taht time again it's stupid question time from me.. I am just installing BRE for the first time on my system and it runs great, but I can't seem to get it to detect ANSI it always asks me to accept ANSI. IS there a
    flag I need to set in setup or something? I can't find any info anywhere...

    --- Mystic BBS v1.12 A44 2020/01/30 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Al@21:4/106 to Bucko on Sun Feb 2 02:38:24 2020
    Jeez, it's taht time again it's stupid question time from me.. I am
    just installing BRE for the first time on my system and it runs
    great, but I can't seem to get it to detect ANSI it always asks me
    to accept ANSI. IS there a flag I need to set in setup or
    something? I can't find any info anywhere...

    I remember that from my BRE days years ago but I don't remember if I
    managed to get it to stop asking. BRE creates it's own drop file based on
    the drop file created by the BBS so I'd have a look at that drop file and
    see what it looks like. You might get different results also by reading a different drop file. Some doors work best with door.sys and others with dorinfo1.def or something else.

    I'm doing the same right now with Operation Overkill ][, it creates
    BBSINFO.OO from the BBSs drop file.

    Ttyl :-),
    Al

    --- MagickaBBS v0.13alpha (Linux/x86_64)
    * Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106)
  • From Bucko@21:4/131 to Al on Sun Feb 2 08:06:11 2020
    On 02 Feb 2020, Al said the following...

    I remember that from my BRE days years ago but I don't remember if I managed to get it to stop asking. BRE creates it's own drop file based on the drop file created by the BBS so I'd have a look at that drop file and see what it looks like. You might get different results also by reading a different drop file. Some doors work best with door.sys and others with dorinfo1.def or something else.

    I'm doing the same right now with Operation Overkill ][, it creates

    Thanks Al, I am going to have to look into another drop file, Might work.. :)

    --- Mystic BBS v1.12 A44 2020/01/30 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Blue White@21:4/134 to Bucko on Sun Feb 2 13:48:51 2020
    Bucko wrote to All <=-

    Jeez, it's taht time again it's stupid question time from me.. I am
    just installing BRE for the first time on my system and it runs great,
    but I can't seem to get it to detect ANSI it always asks me to accept ANSI. IS there a flag I need to set in setup or something? I can't find any info anywhere...

    I am using door.sys on my DOS BBS. There is a program that comes with BRE, SRDOOR, that runs before BRE in the door batch file which reads the
    door.sys and creates a setup file which BRE then reads.

    Do you have BRE configured to read your drop file type, and do you have
    SRDOOR set to run before BRE in the BAT file?


    ... DALETECH - for all your home security needs!
    --- MultiMail
    * Origin: Possum Lodge South * possumso.fsxnet.nz:7636/SSH:2122 (21:4/134)
  • From Bucko@21:4/131 to Blue White on Sun Feb 2 15:53:46 2020
    On 02 Feb 2020, Blue White said the following...


    I am using door.sys on my DOS BBS. There is a program that comes with BRE, SRDOOR, that runs before BRE in the door batch file which reads the door.sys and creates a setup file which BRE then reads.

    Do you have BRE configured to read your drop file type, and do you have SRDOOR set to run before BRE in the BAT file?


    Using door.sys and have SRDOOR run before bre does in the bat file, not sure what is holding it up, it's not really a big deal just being anal about it.. LOL the game runs.. Just weird.. Thanks for the tips...

    --- Mystic BBS v1.12 A44 2020/02/01 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Blue White@21:4/134 to Bucko on Mon Feb 3 19:40:28 2020
    Bucko wrote to Blue White <=-

    On 02 Feb 2020, Blue White said the following...

    I am using door.sys on my DOS BBS. There is a program that comes with BRE, SRDOOR, that runs before BRE in the door batch file which reads the door.sys and creates a setup file which BRE then reads.

    Do you have BRE configured to read your drop file type, and do you have SRDOOR set to run before BRE in the BAT file?

    Using door.sys and have SRDOOR run before bre does in the bat file, not sure what is holding it up, it's not really a big deal just being anal about it.. LOL the game runs.. Just weird.. Thanks for the tips...

    Hmmm, only thing I can figure is that maybe Mystic (assume that is what you
    are trying to run it with) either is not passing the ANSI value, or is
    passing a value that SRDOOR does not recognize. Are you using the latest
    BRE v0.988 (I think!)?



    ... Overhead the albatross hangs motionless upon the air...
    --- MultiMail
    * Origin: Possum Lodge South * possumso.fsxnet.nz:7636/SSH:2122 (21:4/134)
  • From maskreet@21:1/114 to Bucko on Tue Feb 4 08:28:15 2020
    On 02 Feb 2020, Bucko said the following...

    On 02 Feb 2020, Blue White said the following...


    I am using door.sys on my DOS BBS. There is a program that comes wit BRE, SRDOOR, that runs before BRE in the door batch file which reads door.sys and creates a setup file which BRE then reads.

    Do you have BRE configured to read your drop file type, and do you ha SRDOOR set to run before BRE in the BAT file?


    Using door.sys and have SRDOOR run before bre does in the bat file, not sure what is holding it up, it's not really a big deal just being anal about it.. LOL the game runs.. Just weird.. Thanks for the tips...

    From setting up and running BRE many times over the years, it's the dropfile.

    I've got DOOR.SYS running BRE on DoorParty. If I remember right, using DORINFOx.DEF was the one that caused it to ask for ANSI or not.

    --- Mystic BBS v1.12 A44 2020/02/02 (Linux/64)
    * Origin: throwbackbbs.com -\- meriden, ct -\- (21:1/114)
  • From Bucko@21:4/131 to Blue White on Tue Feb 4 18:37:30 2020
    On 03 Feb 2020, Blue White said the following...


    Hmmm, only thing I can figure is that maybe Mystic (assume that is what you are trying to run it with) either is not passing the ANSI value, or
    is passing a value that SRDOOR does not recognize. Are you using the latest BRE v0.988 (I think!)?

    Actually, using it on Synchronet, altough I might try a different drop file now, maybe DOOR.SR see what happens... Thanks for the help..

    --- Mystic BBS v1.12 A44 2020/02/02 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From Bucko@21:4/131 to maskreet on Tue Feb 4 18:38:41 2020
    On 04 Feb 2020, maskreet said the following...


    From setting up and running BRE many times over the years, it's the dropfile.

    I've got DOOR.SYS running BRE on DoorParty. If I remember right, using DORINFOx.DEF was the one that caused it to ask for ANSI or not.

    --- Mystic BBS v1.12 A44 2020/02/02 (Linux/64)

    I'm using DOOR.SYS also, but I will give DORINFOx.DEF a shot also who knows.. Maybe one of them will work.. LOL Thanks for the help...

    --- Mystic BBS v1.12 A44 2020/02/02 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)
  • From maskreet@21:1/114 to Bucko on Wed Feb 5 11:11:26 2020
    On 04 Feb 2020, Bucko said the following...

    On 04 Feb 2020, maskreet said the following...


    From setting up and running BRE many times over the years, it's the dropfile.

    I've got DOOR.SYS running BRE on DoorParty. If I remember right, usin DORINFOx.DEF was the one that caused it to ask for ANSI or not.

    --- Mystic BBS v1.12 A44 2020/02/02 (Linux/64)

    I'm using DOOR.SYS also, but I will give DORINFOx.DEF a shot also who knows.. Maybe one of them will work.. LOL Thanks for the help...

    It might be the short version of DOOR.SYS you're using. Maybe the longer
    format has the ANSI info in it?

    --- Mystic BBS v1.12 A44 2020/02/02 (Linux/64)
    * Origin: throwbackbbs.com -\- meriden, ct -\- (21:1/114)
  • From Bucko@21:4/131 to maskreet on Wed Feb 5 18:59:08 2020
    Didn't know there was 2 different versions... I will look into that.. Thanks bud....

    --- Mystic BBS v1.12 A44 2020/02/04 (Windows/32)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (21:4/131)