• Jiffydos 6.01 Question on C128-DCR

    From David Hoelzer@3:770/3 to All on Wed Jun 16 07:01:34 2021
    Hiya!

    I just purchased a ROM image set from RetroInnovations (I have emailed them and am still waiting for a response) for the 128-DCR. The problem I have is that they come with absolutely no documentation.

    I'm assuming that the JiffyDOS_C128DCR_6.01.bin and C64_6.01.bin end up together in an EPROM in U32, but how do they get put together? Or do they go somewhere else?

    I found various opinions about using 27256 or 27512 chips... I've actually tried both with one or both images on them, but cannot seem to find a combination that works. How *exactly* do these images need to be combined to have a working 128?

    Thanks!
    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Anssi Saari@3:770/3 to David Hoelzer on Wed Jun 16 23:34:22 2021
    David Hoelzer <cyberdefensedave@gmail.com> writes:

    Hiya!

    I just purchased a ROM image set from RetroInnovations (I have emailed
    them and am still waiting for a response) for the 128-DCR. The
    problem I have is that they come with absolutely no documentation.

    I'm assuming that the JiffyDOS_C128DCR_6.01.bin and C64_6.01.bin end
    up together in an EPROM in U32, but how do they get put together? Or
    do they go somewhere else?

    Looks to me U32 in a 128DCR should have the C64 basic and C64 and C128
    kernals all in one chip. From the description on RetroInnovations it
    seems like they ship only the kernals in separate files? So if your JiffyDOS_C128DCR_6.01.bin is 16 kB and C64_6.01.bin is 8 kB then that
    would seem to be the case.

    So you'll need to combine a C64 basic with those two kernals for one 32
    kB image. From a quick look at the C128DCR schematic and PRG it looks
    like the high half of the ROM has the C128 kernal so the low half should
    have the basic and C64 kernal. I don't know which order but I'd guess
    basic first since it's first in the C64 memory map. Could be the other
    way around too of course. Still, only two combinations to try...
    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
  • From Jim Brain@3:770/3 to David Hoelzer on Sun Jun 20 19:12:45 2021
    On 6/16/2021 9:01 AM, David Hoelzer wrote:
    Hiya!

    I just purchased a ROM image set from RetroInnovations (I have emailed them and am still waiting for a response) for the 128-DCR. The problem I have is that they come with absolutely no documentation.
    I have to disagree with that statement. Every ZIP file, including the
    C128DCR file comes with a file called: ROM Creation README.txt. In it,
    it says:

    ROM creation requires a EPROM/FLASH/EEPROM programmer and suitable stock: (EPROM, EEPROM, FLASH). It is beyond the scope of this document to explain programming steps. Consult your user manual for programming information.

    The non-JiffyDOS CBM files can be found at ftp://www.zimmers.net/pub/cbm/firmware/drives/new/

    The non-JiffyDOS non-CBM files are typically available at Zimmers as well,
    but can also be read from your existing drive ROM(s)

    Jim Brain
    RETRO Innovations --------------------------------------------------------------------------

    Switched C128/C128DCR KERNAL ROM (32kB)
    basic.901226-01.bin
    kernal.901227-03.bin
    kernal.318020-05.bin
    basic.901226-01.bin
    JiffyDOS_C64_6.01.bin
    JiffyDOS_C128DCR_6.01.bin

    I will admit the size is wrong (a switched unit requires 64kB EPROMs,
    but everything else is there.

    Jim
    --
    Jim Brain, brain@jbrain.com
    RETRO Innovations: Contemporary Gear for Classic Systems
    www.go4retro.com
    --- SoupGate-Win32 v1.05
    * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)