1. Forum
  2. FidoNet
  3. BINKLEY

  • Setting up a good BinkleyTerm (BTXE).

    From Gert Koefoed Andersen@2:236/150 to All on Fri May 27 20:01:32 2005
    Hello everybody.

    I is on to try to settig up BinkleyTerm BTXE XR7 Win32 (NT) on my Windows 2000 system by using some of the default setup in the binkley.cfg file, now is the first that it givng me some trouble if BT beeps by commands as (%OS%==OS2) | (%OS%==W32) and other places of (%OS%=W32).
    I think if when I using the win32 nt version of BTXE should it could run by win32 nt setup ad not run of a DOS setup.
    Is BTXe seen the OS as like OS/2 and NT is one and equal the same ?

    2. Then having i some trouble by getting modem to work as I like BTXE to self find out if I using analog or ISDN modem, I have cheap Tekcomm Lucent Venus modem and a Lasas ISDN II modem, the have both worked on my for old times and years back on a FrontDoor Setup as I not have any more.

    The first problem is getting a good setup for Lucent Venus modem by init and answer and poll out.
    Next when the analog modem work and will poll out and take POTS incoming calls to getting the isdn modem to work.

    Gert

    --- GoldED+/W32 1.1.5-20050419
    * Origin: * http://www.sysoptech.net - stn2@sysoptech.net * (2:236/150)
  • From Gert Koefoed Andersen@2:236/150 to All on Wed Jun 1 11:01:04 2005
    Hello All.

    I is on to try to settig up BinkleyTerm BTXE XR7 Win32 (NT) on my Windows 2000 system by using some of the default setup in the binkley.cfg file, now is the first that it givng me some trouble if BT beeps by commands as (%OS%==OS2) | (%OS%==W32) and other places of (%OS%=W32).
    I think if when I using the win32 nt version of BTXE should it could run by win32 nt setup ad not run of a DOS setup.
    Is BTXe seen the OS as like OS/2 and NT is one and equal the same ?

    2. Then having i some trouble by getting modem to work as I like BTXE to self find out if I using analog or ISDN modem, I have cheap Tekcomm Lucent Venus modem and a Lasas ISDN II modem, the have both worked on my for old times and years back on a FrontDoor Setup as I not have any more.

    The first problem is getting a good setup for Lucent Venus modem by init and answer and poll out.
    Next when the analog modem work and will poll out and take POTS incoming calls to getting the isdn modem to work.

    Gert

    --- GoldED+/W32 1.1.5-20050419
    * Origin: * http://www.sysoptech.net - stn2@sysoptech.net * (2:236/150)
  • From Gert Koefoed Andersen@2:236/150 to All on Fri Jun 3 01:08:00 2005
    Hello All.

    I is on to try to settig up BinkleyTerm BTXE XR7 Win32 (NT) on my Windows 2000 system by using some of the default setup in the binkley.cfg file, now is the first that it givng me some trouble if BT beeps by commands as (%OS%==OS2) | (%OS%==W32) and other places of (%OS%=W32).
    I think if when I using the win32 nt version of BTXE should it could run by win32 nt setup ad not run of a DOS setup.
    Is BTXe seen the OS as like OS/2 and NT is one and equal the same ?

    2. Then having i some trouble by getting modem to work as I like BTXE to self find out if I using analog or ISDN modem, I have cheap Tekcomm Lucent Venus modem and a Lasas ISDN II modem, the have both worked on my for old times and years back on a FrontDoor Setup as I not have any more.

    The first problem is getting a good setup for Lucent Venus modem by init and answer and poll out.
    Next when the analog modem work and will poll out and take POTS incoming calls to getting the isdn modem to work.

    Gert

    --- GoldED+/W32 1.1.5-20050419
    * Origin: * http://www.sysoptech.net - stn2@sysoptech.net * (2:236/150)
  • From Bob Jones@1:343/41 to Gert Koefoed Andersen on Thu Jun 2 22:05:26 2005
    I is on to try to settig up BinkleyTerm BTXE XR7 Win32
    (NT) on my Windows 2000 system by using some of the
    default setup in the binkley.cfg file, now is the
    first that it givng me some trouble if BT beeps by
    commands as (%OS%==OS2) | (%OS%==W32) and other places
    of (%OS%=W32).
    I think if when I using the win32 nt version of BTXE
    should it could run by win32 nt setup ad not run of a
    DOS setup.

    Is BTXe seen the OS as like OS/2 and NT is one and equal the same ?

    It should not. OS/2 is not Windows NT or Win32 derivatives. WARNING: I use Binkley 2.60, not XE, and run under OS/2 and not windows. Also, I do not use the the OS specific tests with Binkley.

    2. Then having i some trouble by getting modem to work
    as I like BTXE to self find out if I using analog or
    ISDN modem, I have cheap Tekcomm Lucent Venus modem
    and a Lasas ISDN II modem, the have both worked on my
    for old times and years back on a FrontDoor Setup as I
    not have any more.

    The first problem is getting a good setup for Lucent
    Venus modem by init and answer and poll out.
    Next when the analog modem work and will poll out and
    take POTS incoming calls to getting the isdn modem to
    work.

    You will want to run TWO copies of binkley, one for each modem.....

    Take care.....

    Bob Jones, 1:343/41

    --- Maximus/2 3.01
    * Origin: Top Hat 2 BBS (1:343/41)
  • From Gert Koefoed Andersen@2:236/150 to Bob Jones on Sat Jun 4 00:55:26 2005
    Hello Bob.

    02 Jun 05 21:05, you wrote to me:

    I is on to try to settig up BinkleyTerm BTXE XR7 Win32
    (NT) on my Windows 2000 system by using some of the
    default setup in the binkley.cfg file, now is the
    first that it givng me some trouble if BT beeps by
    commands as (%OS%==OS2) | (%OS%==W32) and other places
    of (%OS%=W32).
    I think if when I using the win32 nt version of BTXE
    should it could run by win32 nt setup ad not run of a
    DOS setup.

    Is BTXe seen the OS as like OS/2 and NT is one and equal the
    same ?

    It should not. OS/2 is not Windows NT or Win32 derivatives. WARNING:
    I use Binkley 2.60, not XE, and run under OS/2 and not windows. Also,
    I do not use the the OS specific tests with Binkley.

    I now have got BTXE to just starts up and looking like it using the tast for modem start up, but the look like it not communicate with the modem by ntcom.dll file and self if i force it to poll out to a node it does nothing it should do.

    2. Then having i some trouble by getting modem to work
    as I like BTXE to self find out if I using analog or
    ISDN modem, I have cheap Tekcomm Lucent Venus modem
    and a Lasas ISDN II modem, the have both worked on my
    for old times and years back on a FrontDoor Setup as I
    not have any more.

    The first problem is getting a good setup for Lucent
    Venus modem by init and answer and poll out.
    Next when the analog modem work and will poll out and
    take POTS incoming calls to getting the isdn modem to
    work.

    You will want to run TWO copies of binkley, one for each modem.....

    I like it to self detect if it is running with analog modem or isdn modem, so I
    can work with it to it all things is as it shall for POTS mailer runs.


    Gert

    --- GoldED+/W32 1.1.5-20050419
    * Origin: Living in interesting times (2:236/150)